CO2 incubator
CO2 incubator is cell, tissue culture and some special microorganism culture.
Mainly used in medicine, immunology, genetics, microbiology, agricultural science, pharmacology research and production.
1.dopt stainless steel inner liner and shelf, quadrilateral semi-arc transition, shelf support can be freely loaded and unloaded, easy to clean the studio;
2.The inlet of CO2 is equipped with a high efficiency filter. The filter efficiency reaches 99.99% for particles with a diameter greater than or equal to 0.3 sheet M. It can effectively filter bacteria and dust particles in CO2 gas.
3.Automatic speed control of circulating fan can avoid the volatilization of sample caused by excessive air volume in the test process.
4.The incubator door can be heated to prevent the possibility of microbial contamination caused by condensed water from the glass door.
5.The independent temperature limiting alarm system ensures the safe operation of the experiment without accidents.
6.Low temperature, high temperature, over temperature alarm and long opening time alarm function.
7.Ultraviolet sterilization lamp is located on the back wall of the box. It can sterilize the inside of the box periodically. It can effectively kill the floating bacteria of circulating air and water vapor of humidifying pan in the box, thus effectively preventing the pollution during cell culture.
Mode |
ZSP-C80 |
ZSP-C160 |
ZSP-C80(A) |
ZSP-C160(A) |
Inner cavity size(mm) |
400×400×500 |
500×500×650 |
400×400×500 |
500×500×650 |
Outer box size(mm) |
550×590×800 |
650×690×950 |
550×590×800 |
650×690×950 |
Temperature range |
RT+ 5~65℃ |
|||
Temperature fluctuation |
≤±0.1℃ |
|||
Temperature uniformity |
≤1℃ |
|||
Humidity range |
Ambient humidity~97% |
|||
CO2 range |
0~20%VN |
|||
CO2 control accuracy |
±0.5% |
±0.1% |
||
CO2 recovery time |
≤Concentration valuex1.2min |
≤3min |
||
Controller |
PID programmable microcomputer controller |
|||
CO2 sensor |
Enhanced thermal conductivity sensor |
Single beam dual wave infrared sensor |
||
Multiple sterilization functions |
UV sterilizing lamp, door heating system and air filter in box |
|||
Humidification method |
Humidifying plate humidification |
|||
data output |
RS485 Interface output |
|||
Humidification method |
Humidifying with external humidifier |
|||
data output |
Special mini printer (Selection) |
|||
Inner cavity material |
Stainless steel |
|||
Outer box material |
Cold rolled sheet sprayed |
|||
Thermal insulation material |
Rigid polyurethane foam and glass wool |
|||
protection system |
Over temperature protection,,water shortage protection,over heat protection, over current protection, over voltage protection, earthing protection. |
|||
Power Supply |
AC220V/50Hz |
|||
Installation power |
0.5KW |
0.9W |
0.5KW |
0.9KW |
volume |
80L |
160L |
80L |
160L |